A 5000 LPH commercial RO plant can generate 5000 litres of pure drinking water in a hour and plant can be ideally used in places where drinking water requirement is 50000 Liters per day, in case even if the requirement exceeds 50000 liters the plant can be operated additional hours to meet your requirements but generally 10 hours of operation is advised for the efficient use of the plant.
Number of Membranes: 6 unit – Size 40 inches Length X 8 Inch diameter
Brands Used: Usual membrane brands fitted are Filmtec, Hydranautics, Lanxess, Water sparks , hitec and oasis. (Commercial grade membranes)
High pressure pumps brands used are Grundfos, CNP, CRI , FTT etc.
5000 LPH Commercial RO Plant used for :
- Big Schools, Offices, factories and Institutions
- Big Hotels, Restaurants, Food and Beverage Industry.
- Centralized RO plant suitable for Flats and Apartments
- Pharmaceutical & Chemical Industry
- Paper and Pulp Industry.
- Also can be customized as per requirement.
Manufacturer of 5000 LPH Commercial RO Plant in Chennai, Dealer of 5000 LPH Commercial RO Plant, Supplier of 5000 LPH Commercial RO Plant.
Specifications of 5000 LPH Commercial RO Plant :
| S.No. | Specifications | Details of Equipment | Quantity |
|---|---|---|---|
| 1 | Raw Water Transfer Pump: Horizontal, centrifugal pump of capacity 12 m³ / hr with base frame and couplings and motor @ 2.2 kw | CRI/CNP Equivalent | 1 No. |
| 2 | Dual Media Filter: Supply, Erection and Commissioning of Pressure Sand Filter with following specifications: Size :610mm(dia) X 1830mm (height) Top & Bottom Flange type. Design Pressure : 10.0 Kg / Cm² Working Pressure : 6.0 Kg / Cm² Service Flow Rate : 20 m³ / hr Vessel: SS 316 Grade Filter Media: Silex, Anthracite& Pebbles Valves: Multi-Port Valves (Manual) Accessories: Frontal pipes, Values, Two Pressure Gauges fitted to give indication pressure drop through filter | Hitech / Pentair | 1 set |
| 3 | Multi Graded Filter: Supply, Erection and Commissioning of Activated Carbon Filter specifications: Size : 610mm(dia) X 1830mm (height) Top & Bottom Flange type. Design Pressure : 10.0 Kg / Cm² Working Pressure : 6.0 Kg / Cm² Service Flow Rate : 20 m³ / hr Vessel: SS 316 Grade Filter Media: Silex, Granular Activated CarbonIodine Value 950 Valves: Multi-Port Valves Manual. Accessories : Frontal pipes, Values, Two Pressure Gauges fitted to give indication pressure drop through filter | Hitech / Pentair | 1 set |
| 4 | 20” Jumbo Micron filters cartridges with housings Capacity: 10m³ / hr | Standard make | 4 Nos |
| 5 | SS High Pressure Pump with Motor Flow rate: 12m³ / hr @7.5kw | CNP/ Grundfos SS 316 Grade | 1 No |
| 6 | 8” Dia Element FRP Membrane Housing Two element housing | Dax/ WaterSparksr | 3 Nos |
| 7 | RO – Membranes – 203.2mm Dia X 1016mm Height. | Filmtec / Hydranautics | 6 Nos |
| 8 | RO Skid with necessary Rota meters with required SS valves and accessories | Complete SS 304 | 1 set |
| 9 | Pipe Works SS316pipes and fittings for High pressure lines, CPVC and BrassValves for high pressure lines. Feed flow, Reject flow regulation valves to suit the design pressure ratings. | CPVC and SS 316grade | 1 lot |
| 10 | Electrical Control Panel with Necessary cabling works All accessories would premium branded only. | Astero NXT | 1 No |
| 11 | Instrumentation Works Input water -Flow meter RO Product and Reject flow meters | Imported | 1 no 2 nos |
| 12 | Chemical dosing Tank & Pump: (Anti-Scalent & Hi- Silica) Dosing Pump: Flow rate: 0-12 lph Dosing Tank: Capacity: 100 lit MOC: PP | Edose / Idose Or Equivalent | 1 no. 1 no. |
| 13 | Clients Scope RO Plant Room Size: 5M (Metres) x 2.5 M x 2.5M (HOS) Equipment Foundations | Client Scope | As required |
- It’s just connect and start use concept. Latest design, Latest Equipments used, High Durability.
- No Anti-scalent required like traditional old RO plants, High pressure Auto flushing takes care of the membrane thus eliminating anti-scalent dosing cost which in turn is a very huge savings on your recurring expenditure
- Online Volt meter, flow-meters, panel lights, push in starter switches etc helps the operation of the machine very easier.
- Auto flush valve (auto timed) helps to double the life of the membrane.
- Low pressure switch and tank full option can make the system fully automatic.
- No Operator required as the plant can be made fully Automatic with level sensors.
1. MICRONFILTRATION
Cartridge filter is provided to remove suspended matter and guard against the entry of foreign material into the final treatment.
2. HIGH PRESSURE PUMP
To overcome the Natural Osmotic Pressure a reverse thrust of high pressure is required to separate the Ions from water.
Depending upon the projection, an initial feed pressure is determined.
A Vertical Multi-Stage Centrifugal Pump is used for this application.
3. REVERSE OSMOSIS SYSTEM
Production of low dissolved solids content by reverse osmosis using state of the art TFC Membranes. The high dissolved are separated into two streams. Product stream – with 2-3% of the feed salt will be collected. The second stream ( Reject stream ) of 97-98% more concentrated salt will be collected. Based on the feed conditions and controlling parameters a recovery ratio can be worked out from 60-75%
4. MEMBRANES
Membranes form the barrier for the ionic separation. This separates the water into two streams. A product stream with ionic impurities and a reject stream with high ionic impurities.The ratio of two streams depends upon the design and can be anywhere between 0.3 – 0.7. The membranes are sensitive to various types of fouling and scaling factors. Hence a proper pre-treatment is necessary. Polyamide thin composite membranes are used and is currently imported items.
5. RO SKID
The skid supports the reverse osmosis pressure vessel, membrane, control panel, pressure gauges and etc., The skid mounted design helps in assembling of components at the shop floor easier and much faster.
An isometric AutoCAD design is developed for SKID Fabrication for better space utilization and plant aesthetics.
6. INSTRUMENTATION
To check the quality and monitor continuously, Online Conductivity Meter will be provided at the RO permeate water.
7. DUAL MEDIA FILTER
This is a separate unit out of the RO Machine which safe guards the machine and gives a longer durability to the RO machine – the raw water is fed to this system so that the color, turbidity and suspended impurities are removed, to certain extent and then water passes to the micron filter in the RO Machine. Certain bacteria and virus are also in-activated due to the activated carbon in this chamber.