A uniquely designed Hydrofogger by our team of Experienced Engineers which can cool an open area of 5000 Sq.ft by bringing down the temperature by 10 degree Celsius in 10 minutes(can be used for other applications also) ,also can be designed to suit your requirements.
When atomized water particles are sprayed to form a curtain around a certain area and allowed to evaporate, heat energy of upto 600 calories per gram of water is drawn from the atmosphere. This results in rapid cooling by upto 10 degree Celsius. The curtain also prevents heat from re-entering the area.
All these years cooling is done only by air-conditioners which compresses gases to give us cooling and more-over to achieve this we need to keep the doors and windows closed but whereas here the cooling is achieved by flash evaporation technology, by this method cooling can be achieved even in an open area.
Applications – Large crowded areas, Large gathering, Increasing workers morale and productivity – specially who work in hot sun, Amusement and theme parks etc
Under this principle because the water is released from tiny orifice any dust particle which weighs less than or equal to the weight of the water which is released from the tiny orifice agglutinates with the dust particle and makes it heavier. This is very effective and dust can be controlled to the maximum.
Applications – Increasing worker morale and productivity – specially who work in dust environments and helps to keep their lungs and respiratory tract clean and keeps them medically fit. Specially Highly effective in industries where glass and ceramic dust is generated which are highly hazardous and damage the lungs.
Watch our video in youtube for Dust control project done for KE Burgmann Flexibles a German based company in Chennai
Humidification is rapidly gaining importance in manufacturing industry. The requirements of today high-speed production process and the increase of heat loads due to their highly efficient process now result in the need of precise humidity control.
Applications – Electronic manufacturing , semi-conductor manufacturing , medical supplies, spray booth, furnaces etc.
For detailed info –
To promote faster growth, increase yields, improve quality and reduce diseases. As a professional grower you know, that it is vital to monitor and control all environmental factors that can affect your crop. Some of the most important environmental ingredients are optimum humidity levels, maximum light levels, ideal temperatures and reduced disease rates. One environmental control technology has proven itself more than any other, in commercial use, to successfully control and improve all of these vital environmental factors. It is the climate control system
Up to 95% relative humidity without condensation can be achieved. Humidity levels will be uniform throughout your greenhouse and precisely controlled. In the winter, fogging will prevent your crop dehydrating from the effects of your heating system.
In the summer, plant growth and production will slow down or stop when the temperatures exceed 85 or 90°F or when the humidity is lower than 40% or higher than 85%. Fogging can eliminate the "peaks" and "troughs" experienced without an effective climate control system. With these excesses eliminated the plant has more time to grow and produce valuable fruit. In some cases fogging can make a greenhouse profitable in the summer where before it was closed due to temperature and humidity excesses!
In mechanically ventilated greenhouses fogging will dramatically reduce summer temperatures. Fogging creates an artificial fog by atomizing water into 10 micron size droplets that suspend in the air before "flash" evaporating, leaving none of the "hot spots" at the ends of the structure that cooling pads are known for. The temperature drop that can be achieved will vary according to the evaporative potential of the incoming air. Reductions of up to 30°F (16°C) have been achieved. A realistic target figure is Wet Bulb temperature plus 3°F. Compared to the traditional "pad and fan" method of cooling, fogging delivers lower temperatures and most importantly temperature and humidity gradients are eliminated. Pad usage is in some cases eliminated or cut in half, a big energy saver. Fogging also provide uniform cooling and humidification in all types of naturally ventilated greenhouses.
Fogging is ideal for all those specialized growing situations, propagation, germination, rooting, tissue culture and especially for plug production. Leading University reports all confirm that a high pressure fogging system is virtually mandatory for plug production, achieving a high success rate with rapid growth. The high humidity created by fogging will allow a higher level of oxygen to get to the rooting structure of the plug, a major factor in successful propagation.
Many diseases are water related. By providing the required humidity in the atmosphere, traditional low pressure misting and irrigation can be cut back. Transpiration rates will decrease and the risk of water related diseases, such as Crown Rot or stem rot is substantially reduced. With a proportional chemical injector, fogging can also be used very effectively to instantly distribute throughout your greenhouse any fully water soluble insecticide or fungicide, substantially reducing labor and operating costs.
For growers operating without heaters, in winter, fogging can act as a thermal blanket to provide a degree of frost protection. In a severe freeze, frost damage to the plant tissue will be reduced. The high pressure fogging system has many unique features and benefits. These include custom sizing, easy grower installation, reliable stainless steel/bronze fitted nozzles producing droplets under 10 micron, anti-drip valves on each nozzle, automatic drain and flush valves, a wide range of high quality pump/motor combinations and triple filtration. If you have poor quality water, optional water treatment systems are available to prevent nozzle blockage.
In seedling, Flower and product Greenhouses:
Living environment of the living beings deteriorates incase of extreme heat, cold, excessive humidity or lack of humidity. Especially during summer heat waves, it’s impossible to ensure a healthy growing environment for the products in the greenhouses. High heat experienced during growth of the plants, retards the growing process and since working environment in the greenhouse progressively degrades follow up and care of the plants by the workers are adversely influenced.
As a result of the fact that the water sprayed from misting – evaporates to remove heat from the ambient air , it’s possible to attain a temperature drop of up to 15 C. Humidity level of the ambient air can be increased up to 95% according to the desired humidity or it’s possible to continue to cool ambient environment by expelling the humid air. Thanks to these features, the above mentioned adverse.
In big kitchens to increase worker productivity -the main key is to bring down the heat this can be achieved only by fogging and making kitchen a happy place for chefs to exhibit their true culinary arts.